Made in USA, 6061T6 Aluminum, Black Type III Hard Coat Anodize

- Compatible with American Defense Manufacturing Recon & Scout cantilever mounts. This includes Gen 1 mounts with 5 screws per scope ring (.259" cantilever height), and Gen 2 mounts with 4 screws per scope ring (up to .291" cantilever height)

- Clamps onto ADM scope mount cantilever with five Torx screws (T10 bit included). Installation takes less than 3 minutes.

- Trijicon RMR footprint, with two recoil lugs and #6-32 screw holes. This includes numerous optics such as the Holosun 507C and 509T.

- Designed for fastest possible transition from variable power optic with minimal snagging and wrist movement, and consistent cheek weld

- Optimized for 30mm scopes with <7/8" windage dial protrusion. Windage dial should be no more than 0.88" taller than 30mm scope body.

- Weighs 1.9 ounces / 54 grams

*NOT compatible with ADM Delta-C mount*
*NOT compatible with Nightforce NX8*